I’m hoping one of the techs there can help me figure out what part I need to replace. I’ve checked the line and the pump for any debris but didn’t see anything. Just sounds like the pump isn’t actually working correctly. Is it more than one assembly I’ll need to replace? A video would be great as well if you can find one for me.
- Ray B. asked 10 years ago
start by removing bottom rack then remove bottom spray arm by pulling straight up vigorously under that there is aplastic lever that will turn in one direction half a turn and pull up then filter screns can be removed at this point you will need a shop vac and a torx driver either t20 or t15 remove screws that hold center post in exstract water completely then move drain impeller by hand with you finger if somthing is still stuck in the impellar keep shop vac on and turn impellar shop vac should be able to remove obstruction check impellar for broken paddles if all checks ok reassemble and use if paddles broken replace drain pump
- Guest answered 10 years ago
- You must login to reply
This sounds like your sump/pump assembly, or motor kit. Part number is 154844101 and I’ll add the link below for you. I didn’t find a video of the actual repair, but a diagnostic of what you’re looking at replacing and possibly hearing. I’ll post again when I can find a more specific repair video for you. Have you also checked the chopper/impeller? I’d start with ensuring nothing is caught there.
- AV Repair Help answered 10 years ago
- You must login to reply
Please login first to submit.
