Hello, I disconnected the part under the freezer door and tried to run the water. However, water barely comes out and completely stops. There is good water pressure unto the back of the refrigerator. It sounds like it’s trying when I push the lever. Ice works fine. What might be the problem on mine, and how can I fix it? I also replaced the filter with a new one.
Thank You.
If pressure is good coming out of the valve can the problem be the water filter housing. How can I eliminate that as the cause? I see no freezing anywhere.
- Don asked 10 years ago
- last edited 10 years ago
HI. You could have a bad inlet valve or a frozen or clogged water tank. Your water tank should be located behind your crisper drawers in the refrigerator. One test you can do is to take the water line off of inlet valve that goes to your dispenser. The call for water and see what kind of pressure is coming out of the valve. If still little to no water at this point you would need to replace the inlet valve since you checked your incoming water pressure and it was good. If your pressure is good coming out of the valve, then you have a clog or frozen line or dispenser. I have attached a video that shows a water inlet valve on a similar model and a link to purchase a inlet valve.
- Brian, Ace Appliance answered 10 years ago
- You must login to reply
Please login first to submit.
