I know there is good pressure and there is only one water line that comes out of the water solenoid in the back of my fridge. my assumption is that it goes to the filter first then splits to the water dispenser and ice maker. so my question is why is my ice maker not getting water? is there a sensor on the ice maker itself that tells the ice maker to draw water. also I put some water in the tray to see if it would make cubes and it did not. what do you think I need to replace. thanks.
- anthony salvemini asked 10 years ago
Hi Anthony, make sure that your Ice Maker is On, the on off selection should be on the front dispenser display. If IM is on, and ice cubes are frozen in the mold and not dropping into bin, the Ice maker will need to be replaced. Attached is a link to the IM for your particular model. I am also attaching a couple troubleshooting videos and a repair guide video to replace the IM. Hopefully this helps. One other thing you may want to check, is that the fill line going into fill cup of the ice maker is not frozen. If the Ice maker is calling for water, you can usually hear the valve energizing. After troubleshooting, if there are any other questions, feel free to ask!
Tony-AceTech52
- Tony, Ace Appliance answered 10 years ago
- You must login to reply
Please login first to submit.
