Closed
Ran through diagnostic mode it flashed the lights indicating it was the main board malfunctioning. Replaced main board. Still won’t complete the cycle. Could it be the board below the drum? Ran fine when I left the appointment. But sometimes it took longer then usual to drain. When I ran through diagnostic mode. Tested it 4 times before I left.
Model Number
Ltf2140fs1
Request Resource Materials
Service diagnostics guide, Videos
- Guest asked 7 years ago
Hello
Do you have any error codes when running through the diagnostic mode ? If it is a slow drain, the board will not let the cycle compete . I would check :
1) Check the drain hose for restrictions.
2) Check for someting stuck in the pump.
3) Start the washer and check for 120 VAC at the drain pump.
See complete diagnostic chart below.
Matt Ace technician
Video Link
- AV Repair Help answered 7 years ago
-
Pump runs fine. It either drains forever or after wash cycle doesnt do anything. Drain is clean. And no display on this unit it only flashed lights indicating it was the board.
- You must login to reply
