washer wirpool

Hi. It can be hard to trace down a water leak. The best way is the run it until it leaks and look under the unit to see where that water is coming from. Some of the more common water leaks on this unit would be from the bearing/ tub seal. This usually leave a brown spray pattern under the unit and on the floor. The unit is usually loud in spin at this point. Another cause of a leak on this unit that I have run into and can be a pain to track down is from the hose that goes to the bleach or soap dispenser. This is under the lid and I have always found the leak on the left side. Check those hoses. It will only leak when it sends water through that specific dispenser. The automatic test mode in diagnostics is great for finding this leak, since it tests every valve and component on the unit. I have attached the tech sheet on this unit so you can run the test mode. Page 1 explains how to enter test mode. I have also attached a link for the parts diagram on your unit as well.