When starting a new washing cycle, the machine used to fill with water when the lid was closed, then the agitator would start after a few minutes…..Now, as soon as the lid is closed, the washer begins agitating with no water in the tub. The water starts filling about 5 seconds after the lid is closed with the agitator still working. The rest of the cycle appears normal until final spin…..It leaves some water (about 1/2 inch), at the bottom of the tub after the end of cycle. Now, the only way to get all water out of the tub after final spin is to turn on the extra rinse feature. This occurs regardless of wash type setting.
- John Eby asked 10 years ago
Hi. I am very familiar with this symptom. This is an issue with the pressure switch, which is an automatic water level sensing switch on this unit. The first thing to try is to open the control panel after unplugging the unit, then unplug the wire harness of the switch. Wait a few seconds and plug the harness back in, close the console up and try starting a cycle . This will have reset the switch and will a lot of times fix the issue. IF you still have issues you will need to replace the switch. I have attached a link for the switch. IF you need any further help please ask.
- Brian, Ace Appliance answered 10 years ago
- You must login to reply
Please login first to submit.
