UNIT WON'T AGITATE OR SPIN

THE MOTOR WON’T DO ANYTHING.

THE LID SWITCH IS GOOD. I HAVE 120V ON C2 AT THE INVERTER. ALL THE PINS AT C4 ARE READING 48V. NO VOLTAGE AT C7.

I’VE SWAPPED OUT THE BOARD, MOTOR/INVERTER. THE LED, ON THE INVERTER IS FLASHING 6 TIMES. THE MOTOR AND TUB SPIN FREELY. BOTH MOTORS HAD THE SAME DIAGNOSTIC CODE WHICH IS ” LOCKED ROTOR”.

I’M AT A COMPLETE LOSS AS WHAT TO DO NOW.

THE SERVICE LITERATURE DOES NOT INDICATE WHAT VOLTAGES SHOULD BE PRESENT.

THANKS IN ADVANCE