What controls the flow of water into the GE ice maker. The water dispenser works fine,
I pulled out the ice maker, gear box, and checked continuity on the water inlet valve. I couldn’t find anything wrong. I checked continuity on the ice maker also. It was good. However, the water continues to run into the ice maker. It had to be turned off at the on / off button.
Bob
- Guest asked 9 years ago
Hello
The ice maker energizes the water inlet valve coil at the end of the harvest cycle. If the water is continuing to flow check for power at the coil harness at the valve on the ice maker side. If you do not have power at the harness when the ice maker is not cycling then you have a bad diaphragm in the valve. The valve diaphragm is not seated properly and water is leaking through. You will need to replace the valve . Here is the part number link https://www.savemoreonparts.com/part/geh/wr57x10050
- AV Repair Help answered 9 years ago
- You must login to reply
Please login first to submit.
