Have a sears kenmore range, not broiling but bake and convection are working.
Broiler unit has no 220 volts but ohms ok, the range has no wiring schematic.
all else working ok. probably a control but want to be sure there isn’t some fuse or thermo in circuit with broil element. Anyone have a wiring diagraming they can share
Thanks in advance
They tend to stick the wiring on the bottom or back of the lower drawer. At any rate, it cannot be a thermal fuse, or both elements would not work, as this interrupts L2. If you check at the clock where the Bk/ Br terminals are, you will probably see that the relay is open on the control. This simplifies things when you have to start tracing. A diagram would not make a lot of difference this way. See video link below Hope this helps
- AV Repair Help answered 8 years ago
- You must login to reply
Please login first to submit.
