0
0

Need to replace the touch pad control for the water/ice dispenser. If anyone has a diagnostic manual that you would be willing to send me, I would appreciate it. Thank you.

Model Number
RS261MDWP
0
0

Troubleshooting

Models Covered:
RS261MDBP/XAA
RS261MDPN/XAA
RS261MDRS/XAA
RS261MDWP/XAA
Press Freeze button a second
time to Force Defrost
for Freezer, measure defrost
voltage at main PCB
Wait 5 seconds between button pushes
Press Freeze button one
time at the Test Mode to
Force Compressor Run,
measure fan and compressor
voltages at main
PCB
Self Diagnosis: Press both buttons (Lighting—
Energy Saver) simultaneously (No sound when
both buttons are pressed at the same time) ’til
the display quits blinking and beeps, 8-12 seconds,
then release and read Fault Codes.
This will also cancel the Fault Mode created by
self-diagnosis at power up.
Forced Mode: Press both buttons (Lighting –
Fridge) simultaneously (No sound when both
buttons are pressed at the same time) ‘til it
beeps and goes blank, 8-12 seconds
FLEX TRAY Ice Makers
When the initial power is applied, the ice tray will stand by for 2
hours. After the 2-hour standby time, the Ice Maker Sensor will check
the temperature , when it is lower than 1.5? for more than 5 minutes,
it will do a harvest, with or without ice in the tray, then fill with water.
58 minutes after water is supplied to the Ice Tray, the Ice Maker
Sensor temperature will be checked. When the Ice Maker Sensor
maintains lower than 1.5? for 5 minutes, it completes the harvest
(if the ice bin is not sensed as full).
Thermistor senses temperature to determine water fill on newer units
Filling the tray
After the water fill is completed, the ice maker sensor will evaluate the
water volume one and a half minutes later. When it detects no or low
water level, it will add more water. First supply time will be 1.5 sec,
next one will be 1 sec and the last will be 2 sec.
Ice Maker Test Button

1 ICE MAKER SENSOR Right-① LED ON
2 REFRIGERATOR SENSOR
Right-④ LED ON
3 DAMPER HEATER ERROR
Right-⑤ LED ON
4 ICE MAKER FUNCTION
ERROR Right-⑦ LED ON
5 EXIT-SENSOR Left- ① LED ON
6 FREEZER SENSOR Left- ② LED ON
7 FREEZER DEFROST
SENSOR Left- ③ LED ON
8 FREEZER FAN ERROR Left-④ LED ON
9 CONDENSER FAN ERROR
Left-⑤ LED ON
10 FREEZER DEFROST
ERROR Left-⑦ LED ON

Showing 1 result
Your Answer

Please first to submit.