went to back of range element tested bad, removed the 4 screws seperated the insulation tried pull in on the element and it move back a inch or so, i know it has slide tabs in front on the bar. is there a release that im missing or do you have to give it a good pull and lift up or down. im at a cross roads
thanks
al
7722631578
just what in wrote
- Guest asked 4 years ago
Hello
See the parts diagram on page #9. You should just have the #2 screws to remove and then slide the element out and remove the terminal connectors. On some models there is a small metal tab that will need to be bent upward to release the element.
- AV Repair Help answered 4 years ago
- You must login to reply
Please login first to submit.