Refrigerator it doesn’t cooling very well. The compressor is running, the condenser fan is turning , the evaporator fan is turning, the pressure in the system is fine. What could be the problem with this refrigerator?. Do you think is with the refrigerator thermistor . How can I put this refrigerator into test mode. Thanks.
I recharged with freon. Is hold the freon in the system. The high side pressure is fine. And the low side pressure is fine too.
- Victor12 asked 8 years ago
Hi. Is the unit running non stop and not getting the proper temperatures? If so you could have a sealed system issue as long as all fans and the compressor are running. It could be a leak in the system or a faulty compressor. You can look at the frost pattern on the evaporator and see if it is even or not. This will also indicate a sealed system issue if you do not have a proper frost pattern. You say your pressures are good, which would indicate there is not a sealed system issue. If the unit seems to turn on and off properly but not at the right temps, you could have a thermistor/ board issue. Also, check your air flow. I have attached the service manual for you. See if you have any error codes and run the diagnostics. Good luck!
- Brian, Ace Appliance answered 8 years ago
- You must login to reply
Please login first to submit.
