Range was converted to LP, now must be converted back to NG. Landlord changed regulator but that is all. Looks like the surface burners need NG orifices (not on unit). I find them in the parts listing.
I see there are LP orifices in parts listing for both bake and broil burners. I do not see NG orifices listed.
Does any know part numbers for the bake and broil burner orifices for NG? Thanks in advance
- David Sutton asked 9 years ago
Every orifice is listed on the original lookup, part shown as 17 below. All the part numbers are for NAT. You will have to order them separately, but at least the parts list shown their location on the range Because of the consruction of today’s burners, it is not advisable to drill orifices any longer. Most, if not all orifices are tapered on the inside and outside of the hole and a slight offset can disturb the proper flow of gas. Most convertible ranges will have an orifice that is screwed down snug for LP and backed off a few turns for Nat gas. The valve outlet will have a needle in the orifice with a passage through it for LP gas.To ensure, just back out the bake or broil orifice to see if there is a needle insert inside the outlet. Again, tightened down for LP and backed off for Nat gas. See videos on orifice replacements. https://www.appliancevideo.com/?s=orifice&cat=&tag=&post_type%5B%5D=post&post_type%5B%5D=premiumvideos&post_type%5B%5D=fromthefield&post_type%5B%5D=embdvideo
.
W10170507
ORIFICE (8K) (LEFT REAR)
W10347414
ORIFICE (15K) (RF)
W10170508
ORIFICE (9.5K) (LR)
W10170511
ORIFICE (17K) (LEFT REAR)
W10170506
ORIFICE (5K) (RR)
- AV Repair Help answered 9 years ago
- You must login to reply
Please login first to submit.
