Seems like the main oven door is not contacting with the latch/light switch.
Model Number
KDRS483VSS00
- James Buchanan asked 9 years ago
James, I’ll walk you through a quick way to correct this.
- Check all the screws behind the oven door gasket – in place and tight.
- Check that the door gasket is installed correctly and with all clips locked into place.
- Check the center hinge receiver, all screws are in place for the front chassis support
- Check the underside of the range below the center hinge receiver and make sure all 4 screws are tight and in place.
- Check that the door hinges are installed correctly & both mounting screws are secure.
- Check that the hinge retainers are closed and not blocked by the hinge cover.
- Check the top of door liner with a straight edge – make sure the liner is not bowed more than the width of a dime.
- Loosen the door panel top screws to a “relaxed” state. Open and close the door and retighten screws.
- Check the light/latch switch assembly – if out of position or stuck in incorrect position.
- If everything checks out, and oven light still stays on, replace hinges.
Let us know if there’s anything else we can do for you.
- AV Repair Help answered 9 years ago
- last edited 9 years ago
- You must login to reply
Your Answer
Please login first to submit.