The ice maker runs continuously and doesn’t fill. The diagnostic test indicate that the heater is on while it is running and the relay says it goes on and off when in diagnostics. I need a service manual. Also the original complaint was that ice was clumping together. When I removed the ice maker it had three cubes jammed in it. I removed them and reinstalled it and then it only made three cubes and that was it and the ice maker just kept running. If I run it in the diagnostics mode and run the ice maker shouldn’t it fill at the appropriate point in the cycle?
I changed the water valve and checked if the line was frozen. It was OK.
- Guest asked 8 years ago
Hello
See technician sheet link below. Go to test #192 for ice maker. The ice maker should not continually cycle, that is definitely an ice maker issue. Once you install a new ice maker you will need to check for at least 1/2 inch of water across the complete bottom of the tray. Matt Ace technician
- AV Repair Help answered 8 years ago
- You must login to reply
Please login first to submit.
