I saw a nice video on load at spin washer video where the Drive Block tab where gone , my seen good but I have the same load and banging vibration at spin when is goes full speed , like the video, what do you think can the block be the problem anyway it woks fine other wise, just load spin LIKE THE VIDEO.
tried cleaning brakes pads added a bit of lubricant to fix hard stop, after changing clutch kit balance springs all and balance pads, I changed clutch kit because of no spin , I fixed that but I was getting a hard stop, so I try to fix by cleaning brakes pads with lite sand paper and housing on brakes there was what seen like grease on it before so added grease again put back together and started getting crazy load spin that I wasn’t getting before, I try adding a small amount of grease on pads and nothing help, I saw your video that could be base block, I was going to order new Basket Drive but I wanted to ask you help first, thanks Juan
- Juan asked 10 years ago
HI. It does sound like the drive block could be the problem. I have attached another videos for the drive block. Just like in the video check to see if the drive block is damaged. Check to see if the tabs on the spin tube are damaged as well and if so you will need to replace it. It does seem odd that this noise happened after the other repairs you have done, so if the drive block seems good I would go back and checkthe repairs you have done so far. A link for the drive block is attached if you need to purchase it.
- Brian, Ace Appliance answered 10 years ago
- You must login to reply
Please login first to submit.
