no spin

You need to get the last stored error out of the machine. Follow these directions carefully.

1. Make sure the unit is off no lights on anything.

2. Rotate the dial quickly counterclockwise a few full turns stopping at 12 oclock

3. Turn the Dial and GO SLOWLY and STEADY

3 clicks forward(Clockwise)

1 clicks back (Counterclockwise)

1 click forward.(Clockwise)

All lights should light up if done correctly.If not start it over and remember go SLOW and STEADY between clicks count 1 Mississippi between clicks.

Once they do all light then you want to rotate the dial forward(clockwise) until DONE only is lit. Once that is lit, press Start then rotate the dial 1 click forward and tell me what is flashing and the pattern.