No power to dish machine. I tried to communicate with different individuals on this unit. One advised me to replace control panel, which I did. Same result. A second person told me it was the main circuit board, which I replaced. Again, same result. Just saw a video on noise filter. Told me to check fuse under epoxy but my filter did not have a fuse. Considering what I have paid for parts I should have bought a new dishwasher but I’m committed to fixing this thing now. Also the cord for the doors that attach to springs have snapped off if you can give me part numbers on the cords I would appreciate it ——- greatly!
Replaced control panel and main circuit board. I have a good multimeter (a fluke). So please I need some help to get this thing running. And any help will be greatly appreciated. Thank you!
- Guest asked 5 years ago
Hi. The part number for the door hinge cables is 4933DD3001B. You will need to see where you are loosing power. Check that you have 120V going to the unit at the junction box under the bottom panel. If you do, then see if you are getting power in and out of the power filter board. Separate the door and check for any broken wires. I have attached the service manual for you as well.
- Brian, Ace Appliance answered 5 years ago
-
Thanks Brian, I’ll jump into the info you sent me tomorrow. Thanks for the quick response. My washer, dryer, and dishwasher all kicked out on me in the last week. Took care of dryer and washer but I think I was getting poor info on dishwasher. I’m a commercial HVAC guy and the heat has been brutal so far this year. Was not ready to work on my own equipment when I got home. Thanks again
-
I now have power but the dishwasher only fills and heats the water but nothing from motor. No error messages. It just times out and shuts off without cleaning anything
-
That is strange. If the unit is shutting down before the cycle is complete it should give an error code. Does it drain the water out? How long does it sit in the cycle before shutting off? I would check for stored error codes in the diagnostics and run a test cycle in diagnostics to see if the wash motor, drain pump etc. all work.
- You must login to reply
Please login first to submit.
