No ice

Hello
Testing fresh food ice maker Press ٨ and ٧ temperature pads for up to 10 sec. simultaneously.
Press + or – to move forward or backward through tests.
Deactivate: Press + for up to 10 sec. FFIM Diagnostic Mode will automatically deactivate after 5 min. of inactivity.
NOTE: Silence alarm.

Test To activate test Passing Result
52C Ice Maker Thermistor Activates automatically

FZ display shows temperature sensed by Ice Maker Thermistor.“OP” if open; “SH” if short

55C Water Valve Set Remove ice tray to collect water into a measuring container to measure water
fill. If collecting water into ice tray, first perform test 63C to empty ice tray.

57C Evaporator Fan (FFIM) Set “On” on FZ display when fan activated, “OFF” when deactivated.

58C Remove ice bucket. Allow bail arm to drop freely. Pass if no alarm when tray returns to “home” position.
Hold bail arm up. Pass if alarm sounds when tray returns to “home” position.This test runs continuously until another test is selected. Ice Level Sensor Activates automatically. This test runs continuously until another test is selected.

Remove ice bucket. Allow bail arm to drop freely. Pass if no alarm when tray returns to “home” position.
Hold bail arm up. Pass if alarm sounds when tray returns to “home” p

63C Twist Tray Set. Remove ice bucket. FZ display shows “1” and “GOOD”.
See Diagnostic link below. Matt Ace technician