no heat

Hello
There are many possibilities on a no heat situation. Here are some basic troubleshooting possibilities below to check. If you go through these and still have a problem, go to the link below to the technician guide on page #29 for test mode and error checks. Matt Ace technician
1) Check the home’s circuit breaker and fuses, maker sure you have 115 on each side of line voltage to neutral. 220 volts accross both hot terminals.
2) Select a heat setting other than Air Fluff.
3) Clean the lint filter and exhaust duct.
4) Dryer may have moved into the cool-down phase of the cycle.
5) Do not overload. 1 wash load = 1 dryer load.
6) Sort heavy items from lightweight items.
7) Large, bulky items like blankets or comforters may require repositioning to ensure even drying.
8) Check that the dryer is draining properly to extract adequate water from the load.
9) Load may be too small to tumble properly. Add a few towels.

Hello
Can you double check your model number. This # dv42hs200ewia3 does not come up in our system. Thanks Matt Ace technician