1
0

I removed the control module and replaced,the touchpad. The display no longer works but everything else,does. Did I leave,off a wire which I can’t find, or is something else going on.

Model Number
gy397lxus02
What have you tried so far?

Checked wiring , but I might have messed it up.

Request Resource Materials
Wiring diagram
0
0

Hi. That is strange that you now have no display after replacing the touchpad. Did you have a display before? Try to unplug the touch pad and then check to see if the display comes back. The display is part of the control board on your unit. Check to see if you have 120V at the control board. If you have proper voltage to the control and it does not have a display the control is faulty. the control is part #WP8507P390-60 . I have attached the wiring schematic for your unit.

    • Guest
    • 6 years ago
    I appreciate the schematic. But I wonder if there is a missing cable that powers the display? I put in another control board and again the display doesn’t come on. All functions work, but no clock, no display at all.
    • Guest
    • 6 years ago
    All the cables are plugged. There are two smaller connectors that have nothing going to,them.
  • You replaced the touchpad again or the control board? You may have a wire off but most control boards will have a display with power supplied to it. Check for any disconnected wires and then check for your voltage the the control.
Showing 1 result
Your Answer

Please first to submit.