Something seems bound up. The motor is making an electrical hum noise and it’s pulling alot of current (my lights are dimming). A self reseting circuit breaker soon trips after about 15 seconds of this. I flipped the unit over and the big pully would only turn in one direction. After a few rotations, it seemed free and turned in both directions. I flipped the unit back upright and plugged it in, but it still would not spin. Should I be able to spin the drum by hand? It will not turn either direction now. Any ideas what it is?
- Brian asked 10 years ago
Hi. IF you turned the pulley with the belt off I would suspect a bad transmission, or something stuck between the tubs. If the belt was on make sure your motor pulley and drain pump pulley spin freely. Also, Check to see if the belt is worn. I have attached some videos that will help you diagnose the issue.
- Brian, Ace Appliance answered 10 years ago
- You must login to reply
Please login first to submit.
