Customer called said the box would show sy. Ce. Then the main board would start clicking but she said box was still cooling. The f code usually means the main board is faulty.
I ordered the main board. Today when I went to her place she had the box unplugged she said all it will do is click off and on every 2 seconds . And it does that. When the board clicks the comp. tries to start and the lights try to come on and the front control panel lights up and shows the temp she had it set at. After about 30 seconds you can hear the overload trip and the main board still clicks. Have to unplug box. Any ideas. When I put the new board in the box does nothing. Any ideas.
- Guest asked 8 years ago
Hi. Yes, typically with this error code the main board is bad. This error code is a communication error between the main board and the Display board. You could have a bad display board, but I have not yet had one with this error that the display board was bad. Check your ice makers. There is a sensor on the bottom of the ice makers that is common to break off or get damaged and I have seen that cause this error as well. Make sure when you installed the new board that none of the wires got pinched or broke. I have had that happen as well.
- Brian, Ace Appliance answered 8 years ago
- You must login to reply
Please login first to submit.
