originally it was in “critical failure” with the LED lit indicating the lid switch failed. I jumped out the lid switch and there was no change. I then switched out the board from another machine. It was no longer in the “critical failure” state. The machine won’t do anything. I have 120V at the J8 terminal. I’m thinking that both boards are bad, I need to find a way to confirm that’s the case. The LEDs light when I turn the selector knob. I have tried to start it in all the cycles.
- Guest asked 8 years ago
Okay Mark, the Kenmore brand machine you have was actually made by G.E. and this type of washer will not perform with a bypassed lid switch.The part number for the lid switch is WH12X10334 .Since the original indication was a lid switch failure you must start with a new lid switch to go any further.The lid switch is fairly inexpensive and is most likely your issue.
- Sam, Ace Appliance answered 8 years ago
- You must login to reply
Please login first to submit.
