Machine fills but won’t agitate or spin. Digital display seems to be working o.k. It’s displaying times for cycles and no dimming of segments. Seems to be responding.
No Power to diverter board. No led indicator light working on diverter board on top of motor. Tried manual reset on machine didn’t work. Its like it is all dead to the motor. What do you think this problem is?
- Guest asked 8 years ago
Hi. Since your not getting any power to the motor I would check your lid switch, fuse and control. The fuse is p# WH49X10055 . It’s located it the group of wires going down the front right of the cabinet to the motor. It is usually covered with black tape. It shows the fuse wires are white with a red tracer. Locate that wire at the board and at the motor and check it for continuity. If the fuse is bad, something usually causes it to go bad. You can bypass it to test the unit out before you replace it.
- Brian, Ace Appliance answered 8 years ago
- You must login to reply
Please login first to submit.
