LG TOP LOAD WASHER DOES NOT AGITATE IN TEST MODE. BUT CAN HEAR NOISE LIKE ITS AGITATING.
Model Number
wt1101cw
Request Resource Materials
Service diagnostics guide, Service bulletins, Service pointers, Job aids, Videos
- Guest asked 6 years ago
Hello
Inspect for evidence of a water leak at the Clutch assembly if visible...replace.Also test the Hall Sensor. Matt Ace technician
Stator
– Check ohms: 5 to 15 ohms. But consistency is more important than the specific
reading. All three windings should have same resistance.
– Failures are usually related to the hall sensor
• Rotors
– Magnets can crack. Inspect.
– Will pick up nails and crap if carelessly set aside.
• Shifter plate (clutch)
– Fairly common fail item.
– Recommended truck stock.
• Hall sensor
– RD6 and BL6 on main PWB
• Oscillator
– Used with the pressure sensor.
– Generates frequency
Video Link
- AV Repair Help answered 6 years ago
-
THANKS.
-
It sounds like you’re wash plate might be stripped. Remove your wash plate by removing the cap and then the bolt that holds it on. Then you can check the splines of the wash plate to see if they are stripped and not engaging the splines of the gear case
- You must login to reply
Your Answer
Please login first to submit.
