Our Maytag washing machine has a leak. We have changed the hot and cold water hoses and that did not fix the problem. What should we look for next?
- Harley Clark asked 6 years ago
It’s very difficult to guess where the water is leaking from without actually inspecting. You’ll need to remove the 2 screws near the bottom of the front panel. The screws are just below the crease toward the bottom of the front panel. Remove these screws and the front panel will pull forward at the bottom and hinge up so you can remove the entire front panel. Once the panel is removed, just inspect and see if you can locate a leak. The most likely leak locations could be the bottom of the tub where the transmission goes up through the center (that would require a new main bearing and seal if it’s leaking form here), or possibly a drain hose or the drain pump itself mounted in the front right corner to the bottom of the floor. But you’ll need to inspect to see for certain where it’s leaking from.
- AV Repair Help answered 6 years ago
- You must login to reply
Please login first to submit.