Frig and freezer run hot compressor runs condenser fan runs don’t know about evaporator fan when door is open can hear it when door is closed can’t hear it. Is there a way to check to see if its running? Doors don’t have switches (push in ) its a magnet at bottom of freezer door.
Replace control panel board, replaced PCB board don’t know if boards need to go through some kind of setting by me are not.Anyway nothing has changed.
- dan0418 asked 9 years ago
- last edited 9 years ago
This is a 12 volt DC evaporator fan motor # DA31-00146H . If you can hear the motor run when the door is open your motor is most likely not your issue. They have magnetic door switches. If the unit is calling for cool cooling the motor will run consistently until the thermistor and temperature control is satisfied. If you replaced the control panel board, and PCB board and are getting above normal temperatures in the bother freezer and refrigerator section. The condenser motor & compressor running, you need to look at the evaporator to see if you have an even frost pattern. My guess without seeing the unit is a sealed system problem. I think you have a leak in the system or a bad suction vale in the compressor. Matt Ace technician
- AV Repair Help answered 9 years ago
- last edited 7 years ago
- You must login to reply
Please login first to submit.
