Water dispenser works fine. Replaced dual valve in door, power goes to valve but no water out of it to ice maker. Checked pilot valve in rear, has power to it for water dispenser, however no power going to pilot valve when ice maker tries to fill.
Model Number
Lfx25978sw/00
What have you tried so far?
Replaced water valve in door.
- Guest asked 6 years ago
- last edited 6 years ago
Hello
Go to the manual link below and go to page #64 for the ice maker diagnostics & troubleshooting page. You will be able to test fill and check the solenoid. Matt Ace technician
- AV Repair Help answered 6 years ago
-
The diagnostics don’t address this problem. There is no voltage going to the pilot valve when the ice maker tries to fill. Already replaced ice maker and main PWB and still have the same problem. Water dispenser works fine.
-
You have replaced the ice maker, dual valve, and main control? you could have a wiring issue at that point. Possibly a broken wire internally. You can cycle the ice maker but no water comes in? no power to the valve? Check for a frozen fill tube/ water line if your not positive that the valve is not getting power.
- You must login to reply
Your Answer
Please login first to submit.
