Answered
0
0

I have disassembled and repaired this in door ice and water dispenser 3 times for various fixes, but this one i need some help. Both ice and water levers fail to activate. i have replaced the plastic bracket in the past and it is not a mechanical contact issue with the levers. i have also checked the door switch with an ohm meter and it seems to be functioning also. what is the next part to look into? thanks

Model Number
ed2fhexnl00
Refrigerator
Share
Filter
Sort by: Newest First
Best Answer
0
0

I would start next by testing to see if you have water going to the inlet valve at the rear of the machine, remove water line and test for flow need to find the water supply shut off first and i always like to kinda crack it loose and see if water begins to come out fast before shutting water off maybe hold if over a towel or bucket , i have seen aot of time its the shut off valve get plugged up and when you shut them off they will then smash that and when you open it back up they will have a water flow so check to see if you have water pressure to the valve first then i would check for voltage at inlet vavle of 110v when pressing lever have some one help you.

0
0

When you say fails to activate, do you mean there is no water or ice coming out or the unit mechanically does not actuate the switches? Is the unit making ice? Are the cubes large or small or even hollow? What kind of valve to you have your supply line going to? Is it calcified? Is there water making it through the valve? If so I would check and make sure there is water making it to the unit. Is water making it past the valve?

Showing 2 results
Your Answer

Please first to submit.