looking for which pins to check on board to see if ice maker is receiving voltage and signial from board
I have replaced ice maker with new one
- dan0418 asked 8 years ago
- last edited 8 years ago
Hello
See complete diagnostic link below.
Service Test – 192 Ice Maker State Test
Display shows the status of the Ice Maker and the Heater (ON or OFF).
When left Fresh Food door is open the Ice Maker cannot be energized, the test will display dr
indicating an open Fresh Food door. When the Ice Maker heater is on, the test will display OnH.
Service Test Mode:
The service test functions are performed using the refrigerator display and keypad. Enter the Service
Test Mode by performing the following sequence of events:
1. Press and hold the Door Alarm Keypad .
2. Press and hold Refrigerator Temperature Up Keypad .
3. Release the Door Alarm Keypad and wait 3 seconds.
4. The Freezer display will display SE confirming entry in the Service Mode.
5. Press the Refrigerator Up Keypad again to confirm entry in the Service Mode.
6. Display will show 101 in left display and numeric or dashes in right display.
7. Press Freezer Up Keypad and Freezer Down Keypad to toggle through Service Test numbers.
- AV Repair Help answered 8 years ago
- You must login to reply
Please login first to submit.
