Regards!
The problem with the refrigerator is that the evaporator fan motor is not working because it does not reach 120 volts. When you check with the voltmeter the voltage that reaches you is around 22 volts. I Check the electrical diagram that is located on the bottom of the refrigerator and the 120 volts leaves the Beta Control terminal J1-6 and also indicates on a “Beta Codes” that has the refrigerator by
example, the first one indicates “2” Flashing- Open Thermistor. Ok, what I want to know is how to provoke the exercise so that the refrigerator makes the self-diagnostic. I already checked the 2 sensors and they gave me around 8 and 9 ohms and I gave them heat with a blower and both sensors changed from ohms to 3 y 4 ohms.
I already checked the 2 sensors and they gave me around 8 and 9 ohms and I gave them heat with a blower and both sensors changed from ohms to 3 y 4 ohms.
- Guest asked 5 years ago
Hi. I do not believe this unit has a diagnostic function. I have attached the service manual for it. Take a look. I did not see any error code mode, test mode, or diagnostic mode. Check your fan motor for resistance to see if it tests good. If it does and your not getting proper voltage you must have a fault control.
- Brian, Ace Appliance answered 5 years ago
- You must login to reply
Please login first to submit.
