THIS IS SECOND TIME ASKING WHAT COULD BE PROBLEM
AND WHAT IS OHMS ON SAFTEY VALVE WOULD BE TWO PIN ON TOP AND TWO PIN ON BOTTOM
PLEASE LET ME KNOW THANKS SO MUCH
NOTHING JUST TEST IT
- Guest asked 9 years ago
Also, there is a shut off valve on the safety valve. Maker sure this is not turned off. I don’t think it could be if the broil is still working.
- Brian, Ace Appliance answered 9 years ago
- You must login to reply
If you replaced the igniter and you have power to the valve, you will need to replace the gas valve. 95% of the time its the igniter . We do see defective main vales about 5% of the time.
- AV Repair Help answered 9 years ago
- You must login to reply
Most likely you do have a weak igniter. if valve ohms out properly and and igniter is getting 120 since it is glowing, the only viable problem would be a weak bake igniter. Even getting 3 amps to igniter does not guarantee that igniter does not have a weak spot.
- AV Repair Help answered 9 years ago
-
Hi, I changed the baked igniter to a brand new one to no avail. What else could be the problem? Please reply as soon as possible.
- You must login to reply
Hi this is Cristian, an appliance technician at Ace Appliance. The Ohms rating should be anywhere from 1.2 Ohms- 2 ohms. + or – 10% each way for each side (top and bottom). If you still have issues please let me know.
- AV Repair Help answered 9 years ago
-
Hi I checked is right ohms(( top and bottom) and bake igniter glow over 3 amp current and on touch pad all function is working . there is flame on broil but not on bake. please let me know what could be problem best regards
- You must login to reply
Please login first to submit.
