Hello Appliance techs, I am working on a G.E. gas profile range, the bake and the broil does not ignite. the convection fan does not run. customer said lightning hit the house damaged phones and outlets throughout the house. I have checked both igniters and the oven sensor all check good, when you turn bake or broil on digital read out display reads 100. oven does not light or heat.my thoughts are the control board is damaged. I do not have a wiring diagram or a schematic on this range do you have a service manual on this range. any thing else you think I should check or might have missed. thank you for your time and your help.
checked igniter with ohm meter and oven sensor oven sensor was 1080 ohms. igniter had continuity.
- Guest asked 7 years ago
Hello
Do you have any error / failure codes on the display ? If lighting did hit this I would look for stored error codes before you replace the main PCB. I have provided a wiring diagram link below and a service technician sheet. Matt Ace technician
- AV Repair Help answered 7 years ago
-
Thank you Matt.
-
Matt Thank you for your help. I replaced the glass touch control board and it repaired the unit.Thank you for your help.
- You must login to reply
Please login first to submit.