Samsung RF4267HARS. First I found water in the bottom of the Refrigerator compartment and on the floor under the refrigerator. Now the food in my Flex Drawer is freezing. What should I fix or replace? I have been reading that the heaters are faulty and the drain sensor fails as well. Should I change out both while I am inside there?
- Scott asked 10 years ago
your drain is plugged and or frozen you will need to remove all shelving in the middle of rear wall is a shelf rail it 2 phillips screws top screw has a plastic cover that pries out note unit should be unplugged for a couple of hours with doors wide open to make removal of evap. cover possible after screws are removed you will need to pry evap. cover out using a paint scrapper being careful not to break styrofoam duct asm.use a turkey baister to thaw and flush drain then take piece of coat hanger metal not plastic long enough to wrapp one end around heater along underside of evap.and able to insert into drain hole aproximately 1 1/2 inch into drain hole then reassemble replace shelving and your problem will be solved
- Guest answered 10 years ago
- You must login to reply
your drain is plugged and or frozen you will need to remove all shelving in the middle of rear wall is a shelf rail it 2 phillips screws top screw has a plastic cover that pries out note unit should be unplugged for a couple of hours with doors wide open to make removal of evap. cover possible after screws are removed you will need to pry evap. cover out using a paint scrapper being careful not to break styrofoam duct asm.use a turkey baister to thaw and flush drain then take piece of coat hanger metal not plastic long enough to wrapp one end around heater along underside of evap.and able to insert into drain hole aproximately 1 1/2 inch into drain hole then reassemble replace shelving and your problem will be solved
- Guest answered 10 years ago
- You must login to reply
Please login first to submit.
