The parts diagram does not show a flow meter for this unit but typically there is one just after the full valve and before the case break. Is there by chance one on this unit? Since it is filling then draining it thinks it either is getting to much water or possibly the leak detector is sending water. Has the unit been uninstalled?
- Guest answered 9 years ago
- You must login to reply
Thank you for the question. This is typical of a leak. There is a sensor in the base that senses water. There is also a “dishwasher case break with overflow sensor” on the left side of the unit when looking at it. I would recommend uninstalling the unit enough to see the sides and check for any water leak when filling. Also check the base of the unit for water since there is a leak detector under the unit. If you find water you will need to track down where it is coming from. Please let me know what you find and if you have further questions.
- Guest answered 9 years ago
-
Before there was the error SMART AUTO and HEAVY LIGHT and it was not taking water then i replaced “dishwasher case break with overflow sensor” and ECS sensor, After replacing these its take water but its drain then again take water and drain.
-
and there is no water leaking bottom is clear.
- You must login to reply
Please login first to submit.
