F3 code

Hello
The F3 error code means:
1) Oven sensor opened
2) Oven sensor shorted
Unplug range or disconnect power.
2. Disconnect sensor from harness.
3. Measure sensor value (between connector pins) between 1000Ω @ 32°F (0°C) and
2697Ω @ 900°F (482.2°C) (room temperature approximately = 1080Ω) . Also measure
from sensor connector to sensor casing for possible short. If measurement does not
correlate to real temperature, or if short is found, replace sensor.
4. Trace wires and connectors to sensor from control, then back to control. If wire or
connection is damaged, replace the harness.
5. Reconnect the sensor to the harness.
6. Replace all parts and panels before operating.
7. Plug in range or reconnect power.
8. Press BAKE and START. Observe for longer than 1 minute. If failure remains,
go to Step 9.
9. Unplug range or disconnect power.
10. Replace control.
11. Replace all parts and panels before operating.
12. Plug in range or reconnect power.
13. Verify operation is normal. Go to Step 1 and complete checks