Kitchenaid built in oven microwave combo KEMS308SSS00. Original call was for a F1E5 error inverter. Inspection of inverter the board was clearly burned in several areas. Replaced inverter board and main control board.
When powered back on got F0E6 lost communication error. Checked all fuses and wires between Appliance Manager Board and microwave user interface. Had to replace manager board. After replacement, F1E5 error came back.
What have I overlooked or done incorrect? I would like to get this running for the family. Thank you.
Replaced inverter board, main board and appliance manager board. Checked all switches, fuses and wiring between boards.
- Guest asked 6 years ago
Hello
Go to page #3 in the service manual link below. I would try to clear the stored error codes. If the come back after you go through this procedure, you will need go through the diagnostics in the manual. Matt Ace technician
To Clear Last Error Codes
1. Unplug oven or disconnect power.
2. Wait 10 second, reconnect or plug in oven.
3. Enter Diagnostics mode by pressing OFF, OFF, START.
4. Press key #6 to show cavity size select screen.
5. Press key #6 to show error code.
6. To edit press CLOCK key.
7. Press START key to clear last error. Control should display
GOOD.
- AV Repair Help answered 6 years ago
- You must login to reply
Please login first to submit.
