the customer states that when the machine is cold or warm then she gets the f01 but if it’s on HOT the machine works fine with out an error code
- Guest asked 8 years ago
Hello
The F01 error A communication error between the Central Control Unit
(CCU) and the EEPROM onboard the CCU occurred.
Possible Causes/Procedure
■ A power glitch may cause this error.
– Unplug washer or disconnect power for two
minutes.
– The washer should operate on its own dedicated
circuit. If operating on a common circuit, it may
be receiving line noise from other appliances.
– Check CCU operation by running same cycle with
same loads in which the failure was observed.
MAIN RELAYS ERROR
One of the main relays is not working properly.
Possible Causes/Procedure
■ The relay might be welded replace CCU board
SEE LINK BELOW FOR DIAGNOSTIC SHEET
Matt Ace technician
- AV Repair Help answered 8 years ago
- You must login to reply
Please login first to submit.
