Whirlpool Cabrio Customer complaint it doesn’t complete spin cycle, water is pumped out but clothes are still wet. They start spin cycle to finish load.
Error codes:
F7E7 – Motor unable to reach target rpm
F0E2 – Over suds
F7E1 – Basket speed sensor fault
Unit agitates and spins in diagnostics. There is no clothes caught between tubs. There were no flashing lights when performing the tachometer verification mode. Wires and connections were good.
Not sure if this is a shifter problem or main pcb problem?
- Don Kopecky asked 10 years ago
I keep the mode shifter on my truck. Takes no time to put on and retry. When it does this, the best way to tell is to lean the machine back, (or on its front), and look at the position of the shifter arm. If it is midway between agitate and spin, there’s a good sign. If the machine has had at least 3 years of regular use, consider changing the cam and spring assembly as well to assure smooth shifting. Be sure to calibrate the machine after replacing the shifter, etc.
Is the pump draining efficiently? The control sees the water level as it drops during pump out.
- AV Repair Help answered 10 years ago
- You must login to reply
Please login first to submit.
