My dispenser does not dispense any water or Ice. Although if I initiate the dispenser at the same time pull down with my index finger to initiate the movement , It does work. The other part is, If I loosen the screws holding the assembly in place and Pull it toward me just a little it also works. Very strange. I’m missing something, Just don’t know what it is…Can you help
- Bob Henderson asked 10 years ago
start with removing trim cover around dispensor housing this is done by useing a very small flat blade screwdriver insert driver into top left corner outer of trim then slowly and gently move down and around trim popping tab out of position then at top of disp.touch pad left and right remove 2 phillips screws panel will lean forward and lift out 2 more screws feft and right and module will come out check for voltage at dispensor switch if no voltage you will need to move to checking continuity through your door switches 2 at top and one in left side wall of freezer if you need further assistance let us know
- Guest answered 10 years ago
- You must login to reply
Please login first to submit.
