Good day Gentlemen,
My name is Roland, I am working on a KitchenAid duel fuel range. The issue is the open burners work, however, the oven and all it’s functions dose not. The interface board will not reset from PF Code. I end up replacing the relay board and the interface board on this unit. I attempt to enter the clock info. but all I am able to do is get the unit to show a series of _ _ _ _ _ _ dashes on the display. I am able to cancel and restart, but it continues to come back to the same thing, a series of dashes. Have anyone had the experience with this unit and this issue before.
Thank you
Roland
replace both interface board and relay board.
- Guest asked 9 years ago
Good day Brian,
I changed out the relay board and the interface board. The initial problem was the PF error code will not go away. No matter what you tried. I will try that and let you know what happens.
Thank you
Roland
- Guest answered 9 years ago
- You must login to reply
Hi. The first thing I would try is to reset the unit. Even if you have tried this before installing the new parts. Remove power to the unit for 5 mins and plug it back in . Next, I would try to enter diagnostic mode by pressing cancel, cancel, start within 5 seconds. See if it lets you enter diagnostic mode and check for any error codes here. DO you have access to the tech sheet on this model? Also, what part numbers did you install? Let me know what you find out.
- Brian, Ace Appliance answered 9 years ago
- You must login to reply
Please login first to submit.
