Dacor wall oven originally giving a u60 error

I work in a lot of the dacor we find that that u 60 code on certain model numbers and double ovens depended upon the serial number you will have a change the really boredom and the blowers as well There is been some updates to those blower fans as well as updates to the relay boards and they are not a compatible with the old ones This is why you need to change the cooling fans and the really boards together sometimes to relay boards and two cooling fans. Some of the Dacor wall ovens you may need to clear the error code manually in diagnostics after the problem has been resolved.

ERC Quick Test
The process requires two people. To access the program, one person should stand at the oven, while
the other is located at the circuit breaker. The person at the circuit breaker turns off the breaker and
then the person at the oven depresses and holds the cooktime keypad. The person at the circuit
breaker then turns the breaker back on. The display will show the 4-character identification code of the
ERC. Example (1180)
You have 30 seconds between each test mode.
Note: if unit shows time of day start procedure over again.
Test 1
Push and hold convection bake
Bake element and convection fan activate.
Test 2
Push and hold Standard Bake
Bake element activate.
Test 3
Push and hold Pure Convection
Convection fan and convection element activate.
Test 4
Push and hold broil
Broil element activate. (on gas units – ignitor will activate.)
Test 5
Push and hold convection broil (select models)
Broil element and convection fan activate.
Test 6
Momentary push timer 2
Audible tone will sound.
Test 7
Push and hold stop time
Cooling fan activate.
Test 8
Momentary push clock
All LEDs will light up. Push + or – key pad. LEDs wil display numbers
Example: 1111, 2222, 3333, 4444 etc.
Test 9
Last test door open, push and hold cook time for 10 seconds
Self clean latch motor activate. Door latch will complete one cycle.
The test will end and ERC will display the time of day.
NOTE:
Complete all tests within 30 seconds – otherwise you will see a failure code (F-0: Stuck key pad) displayed
EO130SCH SER V-C-06250034WR29X