GOOD MORNING. THE KITCHENAID STOVE IS SHOWING ERROR CODE F2: E1 TY. THIS MODEL HAS THE CONTROL BOARD AND TOUCH PANEL POSTIONED JUST RIGHT FOR A BOIL OVER TO COVER BOTH COMPLETELY, AND THIS DID HAPPEN. I TOOK OUT THE CONTROL PANEL AND LOOKED FOR ANYTHING OUT OF THE ORDINARY, BUT FOUND NOTHING. IT SEEMS THAT THIS CONTROL BOARD IS NO LONGER MADE. CAN ANYTHING BE DONE? THANKS, TODD FROM NY.
PULLED OUT CONTROL BOARD
- Guest asked 9 years ago
If you are looking to salvage the unit you can have the board repaired. The F2 error is a control board error. I have had a lot of boards repaired by fix a board good results. We have used both w/good results. However, FixYourBoard- http://www.fixyourboard.com/ does comprehensive testing of their boards. I go with Core Centric Address: 175 Wall St, Glendale Heights, IL 60139 Phone:(630) 216-5000 http://www.corecentricsolutions.com/ because it is much Faster turn around time, good quality and usually less expensive but regardless of who you have rebuild it, , Always advise the customer that rebuilding is not successful 100% of the time because, just like appliance repairs themselves, sometimes the component need to repair the board is no longer available either or you may get a board back from the re-builder and install it and find only part of the problem was corrected especially depending on who the re-builder is (hint: read the first line above). If this is a run of the mill Electronic Relay Control versus a high-end brand oven controller does affect the success of the repair.
- AV Repair Help answered 9 years ago
- last edited 9 years ago
-
HI. I do not see a F2-E1 error code on the tech sheet. There are 4 different F2 errors. f2E0, F2E2, F2E3, and F2E4. They are all related to the key pad. Any F2 error says to replace the key pad. That being said, with water spilling over both you may end up needing both parts. Sometimes you can turn the unit off any let it dry out and it will work again. I did look up the model number but we are missing the last digit or 2 of it. If you can get me the full model number I can see if I can find your control board.
- You must login to reply
Please login first to submit.
