the unit remain on CL
i cant not change any settings.
i tiered to rest it by the braker it did nit help
i took out all the wires to the board and it did not help.
i did change the board a few weeks before that it worked fine.
now its like its frozen nothing works all i get is a consistent CL
- Guest asked 7 years ago
Hi. The child lock may be on if this model has one. Child Lock:After starting a cycle you can activate the Child Lock.1Press and hold the < button until the “Child Lock” LED illuminates or “CL ” appears on the display.2″CL ” disappears from screen when button is released.Child Lock is now active and buttons will not function, except On/Off.3To deactivate, press and hold the < button until the “Child Lock” LED turns off or “CL ” disappears from the display.
If the child lock is not the issue then we need to look at some other things. Is there any water left in the unit? Does the drain pump run? If so check your float switch for any restrictions and check the base to make sure no water has leaked out and into it. If all of this is good, your control board must be bad and will need to be replaced. I have attached a service manual on this unit for you.
- Brian, Ace Appliance answered 7 years ago
- You must login to reply
Please login first to submit.
