Svc Manual says to check HIGH/LOW signals from HALL SENSOR in MICOM PIN
If EJECTOR is in place: It is an initialized control so the mode can be changed to ice making control Then it goes into some discussion of if the EJECTOR is in place within 2 minutes or if it is in place within 18 mins. Im used to sticking my short piece of Romex into the different slots to check different functions, I have never seen an ice maker with electronics on the head piece. Can you experts help me. Ice maker worked till I removed it and then re=installed it. Tried new ice maker and a new inlet valve with same no ice results. Thanks
New ice maker, new inlet valve, resetting all with no positive results
- Guest asked 8 years ago
- last edited 8 years ago
Hello, I did find a manual for this ice maker but it is a different model fridge but the ice maker is the same. That is odd if it worked be for and now it does not, I would check the wire connections if you have not done so already. I would also ask the customer if they have had any issues with the ice maker befor and also check the temps in the ice maker section it may not be getting cold enough. hope this helps you.
- Guest answered 8 years ago
- last edited 8 years ago
- You must login to reply
Please login first to submit.